HOVD-33K5 Series Split Core Hall Current Sensor
Introductions：
Split Core Hall Effect Current Sensor
Rated input current: 200-2000A DC
Rated output voltage: 4V(T=25℃)
Power supply: ±12V~±15V（5%）
Hole size:64mm*16mm
These are newly developed split core hall current sensor series which can be used for detecting of DC,AC, high frequency, pulse as well as various of irregular wave of current signals.
More Choices
Features：
Split core, Easy to install
Compact and light
Flame retardant (UL94- V0).
Advantages：
High precision and good linearity.
Low offset and gain drift.
Low insert loss, Good overload capacity.
Wide band frequency, quick response.
Describe
Application:
Switching power supply, Welding machine power supply
Battery supply, UPS,Measurement control system, Inverter
Size
Pin definition：1 +，2 -，3 M，4 G
Note: This schematic diagram is the basic working principle of the transformer. We can design the transformer sampling circuit for the customer.
Connect：
Instructions for use:
1. Connect the current according to the calibration direction of the circuit diagram, pay attention to the direction of current.
2. Connect the wire according to the function pin definition of the calibration in the structure diagram.
Specification
|
Mode Parameter |
HOVD-33K51 | HOVD-33K52 | HOVD-33K53 |
HOVD-33K54 |
HOVD-33K55 |
HOVD-33K56 |
HOVD-33K57 |
Unit |
| Input current | 200 | 400 | 600 | 800 | 1000 | 1500 | 2000 | A |
| Measuring range | ±400 | ±800 | ±1200 | ±1600 | ±2000 | ±3000 | ±3000 | A |
| Output voltage | 4 (T=25℃) | V | ||||||
| Loaded resistance | ≥10 | kΩ | ||||||
| Supply voltage | ±12~±15（5%） | V | ||||||
| Current consumption | ≤15 | mA | ||||||
| Zero offset voltage | ≤±20 ( T=25℃) | mV | ||||||
| Offset voltage temperature drift | ≤±20 ( T=25℃) | mV | ||||||
| Output voltage temperature drift | ≤±1mV/℃（IP=0 T=-10~+70℃） | mV | ||||||
| Linearity |
≤1 .0 ( T=25℃) |
% |
||||||
| Accuracy |
≤1 .0 ( T=25℃ VC=±15V) |
% |
||||||
| Response |
<7 |
µS |
||||||
| Insulation hipot |
3.0 |
kV/Min |
||||||
| -3db band width |
DC…10 |
kHz |
||||||
| Working temperature range |
-20~+80 |
℃ |
||||||
| Storage temperature range |
-40~+85 |
℃ |
||||||
Note: If there is no product suitable for your use in the above table, we can tailor the product according to your technical and structural requirements.
For more information about our products, welcome to contact us at any time!
